 |
Browse Catalogue
Product Details
24v "Lead Acid" Battery Discharge IndicatorPart No: 603.906/24vManufacturer Part No: 17617766/004£33.60(exc VAT) |
Description
Model 906 Battery Discharge Indicator
Battery "Fuel Gauge" indicates state-of-charge in 10-bar LED display. Solid-state. Easy to install. Ideal for golf cars, commercial cleaning equipment, mobility aids, electric bicycles, electric marine motors, medical devices and many other applications.
* All principal circuits are integrated in a single chip for long life reliability.
* A 10-bar LED displays the state of charge successively, bar by bar, from full to empty.
* At 70% depth of discharge, a flashing LED signals an "energy reserve" alert.
* At 80%, alternately flashing LED's provides an "empty" status warning.
* Model 906 is compact and easily installed in panel cutouts of only 36.8 X 24.1 mm, with less than 35 mm behind panel clearance needed.
* Recognizes improperly charged battery.
* Key switch activated LED display (state-of-charge is monitored as long as 906 is connected to battery).
* Two reset methods: Open Circuit Reset-OCR (for units with memory option). Upon reconnection of a battery the gauge will reset if it measures 2.09 volts/cell or higher. High Voltage Reset-HVR Gauge must measure 2.35 volts per cell for 6 continuous minutes during charging.
Operating temperature: -40°C to +85°C
Battery "Fuel Gauge" indicates state-of-charge in 10-bar LED display. Solid-state. Easy to install. Ideal for golf cars, commercial cleaning equipment, mobility aids, electric bicycles, electric marine motors, medical devices and many other applications.
* All principal circuits are integrated in a single chip for long life reliability.
* A 10-bar LED displays the state of charge successively, bar by bar, from full to empty.
* At 70% depth of discharge, a flashing LED signals an "energy reserve" alert.
* At 80%, alternately flashing LED's provides an "empty" status warning.
* Model 906 is compact and easily installed in panel cutouts of only 36.8 X 24.1 mm, with less than 35 mm behind panel clearance needed.
* Recognizes improperly charged battery.
* Key switch activated LED display (state-of-charge is monitored as long as 906 is connected to battery).
* Two reset methods: Open Circuit Reset-OCR (for units with memory option). Upon reconnection of a battery the gauge will reset if it measures 2.09 volts/cell or higher. High Voltage Reset-HVR Gauge must measure 2.35 volts per cell for 6 continuous minutes during charging.
Operating temperature: -40°C to +85°C
© Dun-Bri