24v 150A Battery Monitor & Tail Lift Control

150A Battery Monitor & Tail Lift Control
This Unit was designed for use with Tail Lifts Controllers. The Unit monitors the Battery Voltage. Once the Battery V oltage has dropped below the predetermined minimum level (see table ) for more than 30 seconds the Lamp flashes and the Piezo sounds.
If the Battery Voltage is not raised to an acceptable level (see table) within 2 minutes, the Solenoid operates to disconnect the supply for 4 minutes. During this period the Lamp and Piezo remain on continuously.
This 2 minutes, four minutes cycle is repeated until the Battery Voltage is raised to an acceptable level (see table).
A “Start” connection is provided, which reconnects the supply and resets the Timers. This can be activated by one of four methods - wiring diagrams are supplied with the Unit.