Enhance vehicle visibility and compliance with the WAŚ W105 Series 3-LED End-Outline Marker Light. Designed for dual-voltage 12V and 24V systems, this compact LED lamp combines red and white illumination, providing a highly visible end-outline and side marker solution. It features three powerful LEDs of each colour within a durable polycarbonate housing, making it ideal for HGVs, trailers, rigids, and other commercial vehicles. Fully ECE-approved (R3, R7, R10) and waterproof, the W105 is built to withstand demanding on-road and off-road environments.

With straightforward surface mounting and pre-wired 360mm cable for fast installation, this marker light offers long service life and low power draw. Its compact form factor (approx. 120.8 × 42 × 38 mm) ensures a tidy fit even in restricted mounting areas, while standard 83mm bolt spacing makes it a direct replacement for many OE and aftermarket units. A smart choice for fleet operators, bodybuilders, and installers looking to meet UK and EU lighting standards with minimal maintenance.

WAS W140 Series LED End-Outline Marker Lights

New warning lamps W151/W152 have been designed with a special attention to tail lift safety. The lamps are characterized by high impact strength and high load resistance (approx. 4t). This is due to high-quality aluminium used in the lamp body, and mechanically resistant material from which lenses are made. The lamps are waterproof, easy to fit and have a wide operating temperature range (from -40° up to +50°).

Lamps can be combined in various ways: direction indicators can be either controlled or they can operate independently, in which case flashes of light are produced independently by the lamp. The synchronization of two lamps is also possible.

Power consumption at 12V operating voltage 6xLED - 2,2W Power consumption at 24V operating voltage 6xLED - 4,3W

W157 lamps are position lamps combined with a retro-reflector. These universal LED lamps with single light source of a position light/ clearance marker light. A neon-effect light, which produces an eye-catching glow, gives a unique character to W157 lamps. They can be mounted both vertically and horizontally. Due to the pad protecting the vehicle’s painted surface, lamps can be mounted directly on the vehicle or using a hanger a few centimetres apart from the vehicle.

W158 lamps are position lamps combined with a retro-reflector. These universal LED lamps with double light source of a position light/ clearance marker light. A neon-effect light, which produces an eye-catching glow, gives a unique character to W158 lamps. They can be mounted both vertically and horizontally. Due to the pad protecting the vehicle’s painted surface, lamps can be mounted directly on the vehicle or using a hanger a few centimetres apart from the vehicle.

The WAS W158 Series LED Marker Lamps have an integrated Reflex Reflector and include mounting bracket as standard. Supplied either as fly lead bare ends or now we can fit a TE Superseal connecter for quick installation.

Lamp W161 is a part of new series marker lamps. This is a side marker lamp with direction indicator light class 6 whose shape is new in our offer. Lamp is manufactured in LED technology and very well suited to changeable weather conditions. Due to the pad protecting the vehicle’s painted surface, lamps can be mounted directly on the vehicle or using a bracket a few centimeters apart from the vehicle. The lamp can be used in working voltage of 12V and 24V. It is ECE, EMC approved and it is also rated for IP 66/68 class.

WAS W168.1-6 Series LED End-Outline Marker Lights

The WAS W168.9/W168.9DD series are fully‑LED, IP6K9K‑rated multifunctional rear lamps for 12 V–24 V systems, featuring durable rubber housings and available in left/right and ADR-compliant variants. They offer front, rear, and side position lights; stop and fog lights; reversing light; side and rear indicators—with the W168.9 featuring static indicators and the W168.9DD dynamic (sequential) indicators—and come in both short and long arm versions .

The WAS W175 Series LED Marker Lamps have an integrated Reflex Reflector and include mounting bracket as standard. Supplied either as fly lead bare ends or now we can fit a TE Superseal connecter for quick installation.

WAS W17D Series LED Marker Lights | 116mm

Illuminate your journey with unparalleled safety and efficiency using the Was W197 Series 12/24V LED Marker Lights with Reflex. Designed for both 12V and 24V systems, this 107mm LED marker light is an ideal choice for commercial and emergency vehicles. Experience enhanced visibility and durability that stands the test of time.

Key Features and Benefits:

• Dual Voltage Compatibility: Seamlessly integrates with both 12V and 24V electrical systems, offering versatile application across various vehicle types.
• Advanced Reflex Technology: Incorporates reflex reflector technology, boosting visibility and safety without the need for additional components.
• Long-Lasting LED Illumination: LEDs provide a bright, energy-efficient light source, significantly reducing maintenance needs and power consumption.
• Robust Design: Crafted to endure harsh conditions, ensuring reliability and longevity in challenging environments.
• Ease of Installation: Simplifies the setup process, making it user-friendly for both professional installers and DIY enthusiasts.
• Compact and Sleek Profile: 107mm size allows for a discreet yet effective lighting solution, enhancing vehicle aesthetics while ensuring safety compliance.
• Versatile Application: Ideal for a range of vehicles, including trucks, trailers, and emergency vehicles, enhancing safety across your fleet.

The WAS W198 LED Marker Lights provide superior visibility and safety for a wide range of vehicles. With an integrated reflex reflector, these marker lights are designed for enhanced road safety and are available in various lens colours to suit different vehicle lighting needs. The lights come with a robust bracket for easy and secure installation, ensuring long-term durability in all weather conditions. Suitable for trailers, trucks, and other commercial vehicles, these marker lights meet all necessary regulations for on-road use.

Key Features:

• Multiple Lens Colours: Available in amber, red, and clear options to suit various vehicle lighting setups.
• Reflex Reflector: Integrated reflex reflector enhances visibility, improving overall safety.
• Durable Construction: Built with high-quality materials to withstand harsh weather conditions and heavy-duty use.
• Universal Fit: 124mm length fits a variety of commercial and personal vehicles.
• Easy Installation: Comes with a sturdy bracket for quick and reliable mounting.
• LED Efficiency: Low power consumption with high light output, making it an energy-efficient solution for vehicle lighting.
• Regulation Compliant: Meets all necessary road safety regulations for use in the UK and Europe.

Why Choose the WAS W198 LED Marker Lights?

These LED marker lights are a top choice for vehicle owners and fleet managers looking for dependable, high-visibility lighting. Whether for safety compliance or aesthetic enhancement, the WAS W198 ensures your vehicle is well-lit and visible in all conditions. The LED technology not only offers bright, long-lasting illumination but also conserves energy, making it an environmentally friendly option. Additionally, the integrated reflex reflector adds an extra layer of safety by improving visibility from a distance, especially in low-light situations.

Ideal For:

• Trailers
• Trucks
• Commercial Vehicles
• Agricultural Machinery
• RVs and Caravans

Upgrade Your Vehicle's Safety Today!

Choose the WAS W198 LED Marker Lights to enhance the safety and visibility of your vehicle, ensuring compliance with all safety standards while providing long-lasting, energy-efficient lighting.

WAS W199 Series LED Marker Lights (Reflex) w/ Bracket | 117mm

The WAS W21.1‑10 Series offers compact, dual-function LED marker lamps combining front (white) and rear (red) lighting with integrated reflex reflectors—all in a single unit. Engineered for 12–24 V systems and fully ECE‑approved, these lamps deliver road‑compliant performance in a robust IP66/IP68-rated housing, built to resist dust and temporary immersion. Available in left-hand or universal mount formats and offered with flexible cable options—from 18 cm fly‑lead to extended lengths—and connector-ready variants for flat-cable Superseal systems, the W21.1‑10 range is a trade‑focused lighting solution ideal for trailers, HGVs, and commercial vehicle outfitting.

The WAS W21.1‑10RF range is a series of high-performance LED marker and end-outline lights designed for use on commercial vehicles and trailers. Suitable for both 12V and 24V systems, these lamps feature durable, fully sealed housings with IP66/68 protection, making them ideal for harsh operating environments. Available in universal and side-specific variants with a wide choice of cable types and lengths, they offer flexible installation options and are ECE-approved for road use. Reliable and efficient, the W21.1‑10RF series is a trusted lighting solution for fleet operators, bodybuilders, and auto-electricians alike.

The WAS W21.1-10RR Series LED End-Outline Marker Lights offer a compact and durable solution for commercial vehicles, combining front (white) and rear (red) lighting with integrated reflex reflectors. Designed for 12–24V systems and fully ECE-approved, they feature robust IP66/IP68-rated protection for reliable performance in harsh environments. Available in multiple cable lengths and connector types, including fly-lead and Superseal options, these universal-mount lamps are ideal for trailers, HGVs, and plant machinery.

The WAS W21.1-10STAR Series LED End-Outline Marker Lights combine front (white) and rear (red) LEDs with an integrated reflex reflector in a compact, durable housing. Designed for 12–24V systems and fully ECE-approved, they offer reliable, road-compliant performance with IP66/IP68 protection. Available in multiple cable lengths and connector options, including fly-lead and Superseal, they’re ideal for trailers, HGVs, and plant machinery.

The new W240 series are innovative front, rear and side marker/position lamps that emit light on the ground, drawing lines around the vehicle, showing its outline on the road.

The marker lamps produced with LED technology, together with the modern lens with neon elements, create a light pleasant to the eye and also create a distinctive line on the ground. The remarkable design of the lamps combines side position light, front or rear position/marker light along with retro reflector, which is another advantage as it increases the safety of parked vehicles.

Our W240 series lamps meet all homologation requirements and have been tested for environmental protection, receiving IP6K9K. WAŚ marker lamps are electromagnetically compatible, which means they do not emit electromagnetic interference and are immune to such interference. They are also characterized by a lack of polarization, which means that the lamps work properly regardless of how the + and - cables are connected. Moreover, the lamps are universal in voltage, operating within the range of 12V - 24V.

Method of mounting the lamps on a vehicle:

For the modern W240 series lamps WAŚ developed a new method of mounting on a vehicle. First, you need to mount the mounting base to the vehicle using screws, and then you place the lamp in the base by pressing it. The special clip design holds the lamp firmly in the base. Traditionally, it is also possible to mount the lamps using a bracket. In this case, the mounting base with the lamp is connected with the bracket.

The WAS W25 Series LED Roof Marker Lamps are compact, high-performance position lights designed for commercial vehicles, trailers, and agricultural machinery. ECE R91 approved and IP66/IP68 rated, they provide reliable front, side, or rear outline marking in white, amber, or red. These multivolt (12/24V) lamps feature a low-profile design ideal for cab roofs and vehicle body outlines, ensuring visibility and compliance in all weather conditions. Perfect for OEM builds and retrofits, the W25 range combines durability, efficiency, and road-legal performance.

WAS W255 Series LED Marker Lights | 75mm

The WAS W280 Series LED Marker Lights are designed to enhance vehicle visibility and safety. These lights serve as position or clearance lamps, providing clear illumination for various vehicle applications.

Key Features

• Versatile Mounting: Universal mounting options allow for flexible installation on different vehicle types.
• Durable Construction: Built with high-quality materials to withstand harsh weather conditions and ensure longevity.
• Energy Efficiency: Utilizes LED technology for low power consumption and high brightness.
• Multiple Variants: Available in various configurations to suit specific vehicle requirements.

Technical Specifications

• Operating Voltage: 12V-24V
• Cable/Wires: Options include 40cm cable or FLRYY11Y 2x1.0mm² wires
• Light Source: LED
• Mounting Side: Universal
• Protection Rating: IP6K9K, indicating high resistance to dust and water ingress

Why Choose the WAS W280 Series LED Marker Lights?

The W280 Series offers reliable and efficient lighting solutions for vehicle positioning and clearance needs. Their robust design ensures durability, while the universal mounting and voltage compatibility make them adaptable to various vehicles. The energy-efficient LED technology provides bright illumination with minimal power consumption, enhancing road safety.

The WAS W287 Series presents a robust and versatile range of 84mm LED marker and position lights, engineered for commercial vehicles operating in demanding environments. Encased in a flexible rubber housing, these lamps offer exceptional resistance to mechanical damage and adverse weather conditions. With IP6K9K ingress protection and EMC compliance, they ensure reliable performance and safety.

The series encompasses various configurations, including front, rear, and side marker lamps, with options for horizontal or vertical mounting. Available in multiple lens configurations—neon, transparent, and coloured—the W287 Series caters to diverse aesthetic and functional requirements. Each unit comes with dual mounting brackets for flat surfaces and 60mm diameter pipes, facilitating versatile installation.

The WAS W288 Series offers a robust and adaptable range of 84mm LED marker and position lights, engineered for commercial vehicles operating in demanding environments. Encased in a flexible rubber housing, these lamps provide exceptional resistance to mechanical damage and adverse weather conditions. With IP6K9K ingress protection and EMC compliance, they ensure reliable performance and safety.

The series encompasses 13 variants, including front, rear, and side marker lamps, with options for horizontal or vertical mounting. Available in multiple lens configurations—neon, transparent, and coloured—the W288 Series caters to diverse aesthetic and functional requirements. Each unit comes with dual mounting brackets for flat surfaces and 60mm diameter pipes, facilitating versatile installation

The WAS W289 Series is a versatile range of high-performance LED marker and position lights designed for commercial vehicle applications. Built with a flexible rubber body and featuring modern dual light strips, these lamps combine durability with contemporary styling. Available in front, rear, and side marker variants—including options with integrated indicators—the W289 Series offers multi-voltage compatibility (12–24V), IP6K9K protection, and EMC compliance. Each lamp is supplied with mounting options for flat surfaces or 60mm pipe, making installation quick and secure across a wide range of vehicles.

WAS W46 Series LED Marker Lights w/ Bracket | 110mm

WAS W47 Series LED Marker Lights w/ Bracket | 114mm

The WAS W56 Series LED End-Outline Marker Lights are the perfect solution for enhancing visibility and safety on your vehicle. These marker lights are designed to be mounted at the rear or side of your vehicle, providing a clear indication of its outline to other road users.

With a voltage range of 12/24V, these LED marker lights are suitable for a wide range of vehicles. Whether you have a car, truck, or trailer, these lights will ensure that you are visible to others, day or night.

The W56 Series LED End-Outline Marker Lights utilize advanced LED technology, offering superior brightness and long-lasting performance. With their E Marked (ECE R7) and EMC Approved (ECE R10) certifications, you can trust that these lights meet the highest standards of quality and safety.

Featuring an IP rating of 66/68, these marker lights are completely waterproof and dustproof. They can withstand even the harshest weather conditions, ensuring reliable performance in any environment.

As part of the renowned WAS brand, these marker lights are built to last. They are durable, shock-resistant, and designed to withstand the rigors of daily use. With their sleek and compact design, they seamlessly integrate with the overall aesthetics of your vehicle.

Key Features:

• LED technology for superior brightness and longevity
• E Marked (ECE R7) and EMC Approved (ECE R10) for quality and safety assurance
• IP rating of 66/68 for waterproof and dustproof protection
• Durable and shock-resistant construction for long-lasting performance
• Sleek and compact design for seamless integration with your vehicle

Upgrade your vehicle's visibility and safety with the WAS W56 Series LED End-Outline Marker Lights. Order now and experience the difference they can make on the road.

The W56RR Series from WAS is a compact, dual-colour LED marker light designed for side and rear outline marking on commercial vehicles. Featuring integrated red and white LEDs with a built-in reflector, these lamps ensure high visibility and compliance with ECE regulations. Suitable for 12V and 24V systems, the rubber body offers excellent durability and weather resistance (IP66/68 rated). Easy to install via standard 2-bolt mounting, the W56RR is ideal for use on HGVs, trailers, recovery vehicles, and more.

WAS W60 Series LED Marker Lights | 72mm

The WAS W64 Series is a versatile range of LED marker lights designed for commercial vehicles, offering reliable performance with a compact, oval design. Suitable for use as front, side, or rear marker lamps, each unit is fully sealed to IP66/IP68 standards for outstanding durability in demanding environments. Available in surface-mount or bracketed versions, with multiple lens colour options and cable lengths, these E-marked lamps meet ECE regulations and deliver efficient, high-visibility lighting for trailers, trucks, and plant vehicles.

The WAS W65 Series LED Marker Lights are compact, dual-voltage side marker lamps designed for commercial vehicles and trailers. Featuring integrated reflectors, durable IP66/68-rated housings, and efficient 12/24V LED technology, they provide reliable visibility and compliance with ECE regulations. Easy to install with pre-wired cables and surface mounting, the W65 range offers a cost-effective, trade-quality solution ideal for HGVs, trailers, and other road-going vehicles.

WAS W79 Series LED Marker Lights | 61mm

WAS W79RR Series LED Marker Lights | 61mm

WAS W79S Series LED Marker Lights | 61mm

WAS W80 Series LED Marker Lights | 29mm

The WAS W97.5 Series LED Marker Lamps offer a slim, low-profile solution for front, side, and rear vehicle marking, designed for use on commercial vehicles, trailers, and specialist applications. Available in white, amber, and red variants—with optional ADR-compliant versions—they feature durable construction, 12–24V compatibility, and full ECE approval for road use. Each lamp is equipped with 12 high-performance LEDs for enhanced visibility, and supplied with integrated mounting brackets for quick and secure installation. Ideal for operators seeking reliable, road-legal marker lighting with a clean, modern aesthetic.

WAS W83/W84 Series Rectangular LED Signal Lights | 107mm

WAS W173 Series Slim-line LED Signal Lights | 237mm

WAS W87 Series 12/24V Slim-line LED Signal Lights | 237mm

The WAS W83 Series Rectangular Signal Lights (112 mm) are robust single‑function rear-mounted fog lamps, purpose-built for commercial trailers, HGVs, and off‑road or plant equipment. Featuring a standard 112 mm housing, universal 12 V / 24 V compatibility, and ECE R38-approved rear fog lamp performance, the series includes variants (e.g. catalogue numbers 699 and 699z) which differ only in connector orientation or mounting style. They deliver ADR‑compliant safety lighting with reliable durability, making them a trusted choice for trade‑focused fleet retrofits, OEM specification, and maintenance applications.

Compact and versatile, the WAS W238 Series is a 60mm round LED multifunctional lamp designed for demanding commercial and trade vehicle applications. Combining stop, tail, and indicator functions in a single durable unit, it offers high visibility, low power consumption, and long-lasting performance. Ideal for use where space is limited, it’s fully sealed against dust and moisture for reliable operation in harsh environments.

The WAS W125d Series LED Rear Combination Lights (242mm) provide a durable 5-function solution—stop, tail, indicator, fog, and reverse—for trailers and commercial vehicles. Designed for 12/24V systems, each E-marked unit (ECE R6, R7, R23, R38, R3, EMC R10) features a robust 242 × 134 × 58 mm housing with surface-mounting via 2× M6 bolts (150mm centres) and an IP56 or enhanced IP68 rating. Available in left/right-hand variants with options for 2m fly-leads, Tyco, Schlemmer, 5-pin, or 7-pin WAŚ connectors, they offer flexible fitment across a wide range of fleet applications.

A stylish, chrome-ringed "honeycomb" LED rear lamp combining stop, tail, and indicator functions in a 152 mm diameter housing. The W131 features a static indicator, while the W131 Y offers a polished chrome finish. Both operate on 12 / 24 V systems with low power consumption and include a 2 m fly lead. Fully sealed to IP66/68 and EMC-compliant, with E-mark approval, they're ideal for trailers and commercial vehicles seeking durable, compact rear lighting.

The WAS W138d Series LED Rear Combination Lamps offer a compact 350mm solution for commercial vehicles and trailers, combining key functions including stop, tail, indicator, reverse, fog, and integrated reflectors—all fully E-marked to UNECE standards. Designed for 12V and 24V systems with robust IP56 or IP68 ingress protection, these surface-mounted lamps feature a durable housing and pre-wired 2m fly-lead for quick, reliable installation. Ideal for fleet, trailer, and plant applications, the W138d range delivers superior visibility, long service life, and full regulatory compliance—making it the trusted choice for professional vehicle builders and installers.

The WAS W145 Series LED Rear Combination Lights (108mm) are compact, durable units suitable for 12V and 24V systems, offering stop, tail, and indicator functions. Available in standard and ADR-approved versions, they come with a 5-pin connector or direct wiring, sealed to IP66/68 for weather resistance. With E-mark and EMC approval, each light measures 108×102×38mm and includes a 2m cable for easy installation across commercial and trailer applications.

The WAS W145RR series delivers reliable, high-performance LED lighting for commercial and heavy-duty vehicles. Designed with integrated stop, position, indicator, and optional license-plate lights, these compact units feature durable IP66/68 weatherproofing and universal 12/24V compatibility. Easy to mount vertically or horizontally, each lamp meets key ECE certifications (R3, R4, R6, R7, R10) for assured road compliance. Perfect for trailers, trucks, and agricultural vehicles needing dependable, all-in-one rear lighting.

The WAS W146 Series LED Rear Combination Lights (108mm) are compact, high-performance units offering tail, fog, and reverse functions in a sleek, square design. Suitable for 12V/24V systems, they feature a 2m fly lead, 2-bolt mounting (45mm centres), and are sealed to IP66/68. With E-mark and EMC approval, these lights deliver excellent visibility, low power draw, and reliable operation across commercial, trailer, and agricultural applications.

Upgrade your vehicle lighting with the WAS W150 and W150DD rear combination lamps—designed for durability, safety, and modern style. Both models feature high-visibility LED functions with a smooth neon-effect tail light, suitable for 12V and 24V systems. The W150 offers a compact, E-approved solution with stop, tail, indicator, fog, and reverse lights, while the W150DD adds a dynamic indicator for enhanced signalling. Ideal for trailers, HGVs, and commercial vehicles, with IP66/68 protection and EMC compliance as standard.

A compact LED “hamburger”-style rear lamp featuring position, stop, and indicator lights in a sleek round 142 mm housing. Available with either static (W153) or dynamic (sequential) indicators (W153DD), the unit runs on 12/24 V systems and includes a 2 m fly lead for flexible fitting. Fully sealed to IP66/68 and E-mark approved for UK and EU roads, it combines contemporary aesthetics with trade-ready durability and easy installation.

A compact, round LED rear light with integrated position, fog, and reverse functions. Designed for 12/24V systems with a durable, IP66/68-rated housing, it’s ideal for trailers and commercial vehicles needing a robust, E-marked lighting solution in a space-saving form.

The WAS W168.9/W168.9DD series are fully‑LED, IP6K9K‑rated multifunctional rear lamps for 12 V–24 V systems, featuring durable rubber housings and available in left/right and ADR-compliant variants. They offer front, rear, and side position lights; stop and fog lights; reversing light; side and rear indicators—with the W168.9 featuring static indicators and the W168.9DD dynamic (sequential) indicators—and come in both short and long arm versions .

A modern, neon‑style LED rear lamp with a distinctive hexagonal reflector, crafted for trailers and semi‑trailers. Featuring integrated stop, tail, indicator, fog, and reverse lights, with the W170DD variant offering dynamic (sequential) indicators for enhanced visibility and styling. Constructed with scratch‑ and UV‑resistant lenses and high‑quality casings, both series are IP68‑sealed and EMC-compliant, ensuring rugged, weatherproof performance. Fitting is straightforward via a two‑screw (M8x30, 150 mm spacing) mount; available with side‑marker (W44) or rubber arm marker (W48) options. Suitable for 12 / 24 V systems, with plug variants compatible with TYCO, Schlemmer, or WAŚ 7‑pin connectors.

We offer the WAS W171/W171DD Series 350 mm LED Rear Combination Lights—durable, high-visibility units for vans, trucks, tractors, and semi‑trailers with either standard or dynamic (W171DD) indicators. Featuring a sleek, modern design and “neon‑like” diffused glow across position, stop, indicator, reversing, fog, and reflector functions, both 12 V/24 V lamps boast high-quality scratch‑, UV‑ and temperature‑resistant lenses and housing, IP56 ingress protection, and ECE R10 electromagnetic compatibility. They mount easily using two M8×30 surface‑fix screws with a 150 mm span and are available with fly‑lead connections; left or right-hand configurations are supplied in single- or twin‑lamp packs.

Upgrade your trailer or commercial vehicle lighting with the WAS W185 and W185DD LED rear combination lamps – high-performance, E-marked units designed for 12V and 24V systems. These multifunction rear lights feature tail, stop, fog, reverse, and indicator functions, with selected W185DD models offering dynamic (sweeping) indicators for enhanced visibility and modern styling. Built for durability, they are fully waterproof (IP66/IP68), vibration-resistant, and ideal for trailers, plant equipment, recovery vehicles, and agricultural machinery. Choose from fly-lead or plug-in connections to suit your installation needs.

The WAS W187/W187DD Series LED Rear Combination Lights (200mm) offer a robust and modern rear lighting solution for commercial vehicles, featuring up to five functions including tail, stop, indicator, reverse, and fog. Designed with a sleek neon-effect light guide for enhanced visibility and aesthetics, the range includes both static (W187) and dynamic (W187DD) indicator options to suit different fleet requirements. Fully E-approved and IP66/68 rated, these lamps are built for durability in demanding environments and are suitable for 12/24V systems, making them ideal for trailers, HGVs, and specialist vehicle applications.

The WAS W191/W191DD Series are striking round “hamburger” full-LED rear lamps designed for universality and rugged performance. At 140 mm diameter, their innovative wheel-shaped lens emits neon-style position and indicator lighting, available in static or dynamic variants. Built tough with high-grade plastic housings, they’re UV, scratch, and temperature-resistant, sealed to IP66/68, and E‑marked with full EMC compliance—perfect for 12/24 V commercial and specialist vehicle fleets. Each unit includes a 2 m fly lead for rapid installation.

The WAŚ W194 and W194DD series are premium multifunctional LED rear lamps designed for commercial vehicles, trailers, and plant equipment, offering up to five functions including tail, brake, indicator, reverse, and fog lights. Engineered for durability with IP66/68-rated waterproofing, these rear combination lamps feature a sleek, diffused LED design for enhanced visibility and modern styling. Both ranges support 12–24V systems and are fully ECE approved, making them ideal for OEM and retrofit applications. Choose the W194DD for integrated dynamic indicators and an even more striking light signature.

The W205 series is a durable, multifunctional range of elliptical LED lamps designed for agricultural use, offering front and rear lighting with position, indicator (static or dynamic), and brake functions. Built from impact- and weather-resistant materials, they feature three mounting options and are made in Poland. The compact W214 series complements the W205 by adding Tail, Reverse, and Rear Fog functions for a complete rear lighting solution.

The WAS W214 Series LED Rear Combination Lights are compact, 136mm wide lamps designed for agricultural and commercial vehicles, offering reliable Tail, Reverse, and Rear Fog functions. Built for 12/24V systems, they feature durable construction to withstand harsh working conditions and are ideal for use in space-restricted applications. Designed and manufactured in Poland, the W214 Series complements the W205 Series for a complete, high-performance rear lighting setup.

Compact and versatile, the WAS W238 Series is a 60mm round LED multifunctional lamp designed for demanding commercial and trade vehicle applications. Combining stop, tail, and indicator functions in a single durable unit, it offers high visibility, low power consumption, and long-lasting performance. Ideal for use where space is limited, it’s fully sealed against dust and moisture for reliable operation in harsh environments.

A compact, durable LED rear lamp series combining up to five functions: stop, tail, indicator (static or dynamic), reverse, and fog. Ideal for trailers and commercial vehicles, the W270 offers reliable performance, modern styling, and full E-mark and EMC compliance. Designed for easy installation with multiple mounting options and built to withstand tough working environments.

Engineered for maximum visibility and durability, the WAS W277 LINE and W277DD LINE Series offer advanced rear lighting solutions for trailers and commercial vehicles. These 402mm LED lights feature dynamic or static indicators, integrated brake, fog, reversing, and position lights, and a robust, weather-resistant build. Ideal for high-performance applications, they combine cutting-edge design with premium functionality to ensure safety and compliance on the road.

Upgrade your trailer's rear lighting with the high-performance WAS W277 RING and W277DD HALF RING Series. Featuring a sleek 402mm design and advanced dynamic or static LED indicators, these lights combine style with top-tier safety. With multifunctional capabilities—including position, brake, fog, and reversing lights—they’re built for trailers requiring durable, modern lighting solutions. Choose between full or half LED ring designs, with tinted BLACK lens options for a bold look when off and bright clarity when on. Compatible with 12–24 V systems and IP6K9K-rated for extreme durability.

The WAS W278 series combines modern design with high-performance LED technology for trucks, trailers, and other commercial vehicles. Featuring a bold three-line light signature and available with optional dynamic indicators (W278DD Line), these multifunction rear lamps provide stop, tail, indicator, reverse, and fog functions. Built with durability in mind, they are EMC-approved, IP6K9K rated, and designed for quick installation with a choice of cable or connector options—perfect for fleets demanding style, safety, and reliability.

The WAS W278 RING and W278DD HALF RING Series offer high-performance LED rear combination lights with a distinctive illuminated ring or half-ring design. Featuring dynamic indicators, 5 core lighting functions, and a rugged 402mm housing, they’re ideal for trucks and trailers needing reliable, road-legal lighting with a modern edge. IP6K9K rated and EMC-approved for demanding commercial use.

The WAS W279 RED Series is a compact range of premium LED rear combination lights, designed for demanding commercial vehicle applications. Measuring just 236mm wide, these multifunction lamps feature bright LED stop, tail, reverse, fog, and indicator functions—including options with dynamic indicators for enhanced visibility and safety. With a distinctive all-red lens design, IP66/68 protection, and multiple mounting and connector options, the W279 RED Series offers a durable, road-ready solution that meets ECE regulations and the expectations of today’s fleet and bodybuilders.

The WAS W281 Series rear combination lamps are high-performance, 448mm multi-function trailer lights available in standard, dynamic indicator (W281d), and IP6K9K-rated (W281d DD) variants. Designed for 12–24V systems, they combine stop, tail, indicator, reverse, and fog functions in a durable, road-ready housing. The W281d and DD models feature dynamic sequential indicators for improved visibility and safety, while the DD version offers enhanced protection for commercial vehicles frequently exposed to high-pressure washing and harsh conditions—ideal for demanding fleet use.

The WAS W282, W282d, and W282d DD Series are robust LED rear combination lights designed for commercial and specialist vehicles, offering reliable performance and modern styling. Available in multiple configurations, the range includes models with standard lighting functions as well as enhanced variants featuring dynamic (sequential) indicators and optional black housings. With high ingress protection ratings (up to IP6K9K), dual-voltage compatibility (12/24V), and durable construction, these lamps are ideal for demanding applications across fleet, agricultural, construction, and emergency sectors.

The WAS W66 Series LED Rear Combination Lamps offer a compact 200mm solution for trailers and commercial vehicles, combining stop, tail, indicator, and fog functions in a durable, E-marked unit. Designed for dual-voltage (12V/24V) applications and built to IP66/IP68 standards, these rear lights are ideal for harsh operating environments. Available in left- and right-hand configurations with coloured lenses (KR variants), the W66 range features pre-wired 1.9m fly leads and standard 100mm mounting centres—making them quick to install and perfect for fleet upgrades or trade-fit applications.

The WAS W68 Series provides a slim 163 mm LED rear combination lamp combining stop, tail, indicator, and rear fog functions with an integrated triangle reflector. Designed for dual-voltage use (12 V–24 V) and surface mounting, it includes a 1.85 m pre‑wired fly lead for easy left/right installation. E‑marked, ECE‑approved, and sealed to IP66/68 standards, it’s ideal for reliable, low-maintenance lighting on trailers, caravans, and commercial vehicles.

The WAS W70d Series offers 232 mm universal LED rear combination lamps for trailers and commercial vehicles, available in left-hand (W70DL) and right-hand (W70DP) versions, supporting both 12 V and 24 V systems. Each lamp integrates Stop, Tail, Indicator, Fog, Reverse, and Built‑in Reflector functions in a compact, low-profile design ideal for flat‑surface installation. The durable housing and lens ensure reliable performance in demanding conditions, delivering bright, energy-efficient LED lighting that meets OE‑style expectations.

The WAS W73 Series is a slim-line rear LED combination lamp offering stop, tail, and indicator functions in a flat-profile, surface-mount design. Compatible with both 12 V and 24 V systems, it’s ideal for kit cars, trailers, caravans, and commercial vehicles. Universally mountable, sealed, e-mark approved, and trade-focused for easy fitment and reliable performance

The WAS W73ARF Series Slim-Line LED Signal Lights are sleek, 237mm multifunctional lamps designed for vehicles requiring a low-profile lighting solution. Combining Tail, Brake, and Rear Fog functions in a single unit, they offer high visibility, modern styling, and durability for demanding environments. Suitable for 12/24V systems and manufactured in Poland, the W73ARF Series is ideal for commercial and agricultural applications where space is limited but performance can’t be compromised.

A slim, ultra‑flat 140 mm rear lamp engineered for commercial trailers, tow trucks and utility vehicles. Featuring robust 25 mm depth, IP66/68 sealing, and universal 12 / 24 V LED operation, it integrates stop, position, and indicator lights—with optional 5‑function variants adding reverse and fog lamps. E‑marked and ADR‑compliant, it delivers low‑power, high‑durability performance thanks to efficient LEDs and quality materials.

The WAS W52 Series LED Number Plate Light is a compact, 83mm road-legal lamp designed for reliable number plate illumination on trailers, vans, and commercial vehicles. E-marked and suitable for 12V and 24V systems, it features energy-efficient LEDs, a durable housing, and easy surface mounting—ideal for trade fitters and fleet operators seeking a compliant, low-maintenance solution.

The WAS W72 Series LED Number Plate Light (101mm) offers bright, road-legal illumination for commercial vehicles, trailers, and plant equipment. Designed for 12/24V systems, this E-marked lamp features energy-efficient LEDs, a robust housing, and easy surface mounting—ideal for durable, compliant number plate lighting in trade and fleet applications.

WAS W53 Series LED Number Plate Light w/ Rear Position | 83mm

The lamp series W253 are fully LED and come in versions for both the front and rear of the vehicle. The lamps, along with the frame, are characterized by their universality and a variety of lighting solutions. W253 lamps can perform from 1 to 6 functions. Available lighting configurations include white or red reflectors depending on the variant, and/or the following lights: license plate light, brake light, static or dynamic turn signal, reversing light, rear position light, fog light, blue or orange warning light, or work light. The lights look particularly good in neon modules, in which the individual light points are not visible, and the module shines as a whole, creating a pleasant light for the eye.

In addition, the lights come in different configurations, including:

1. short modules located on the left and right of the frame,
2. long modules or one long module, creating one line under and/or above the license plate.

Both frames and lamps are made of high-quality plastics, ensuring durability and resistance to scratches and changing weather conditions. Energy-efficient LED diodes also mean that WAŚ lamps are characterized by long life and low energy consumption. W253 lamps are universal-voltage, operating in the range of 12V - 24V, and also have the required homologation certificates.

The W229 work lamp is made of high-quality material, which is characterized by increased resistance to breakage. The lamp has electromagnetic compatibility approvals. An additional feature of the new lamps is the IP6K9K tightness class. The set is sold with two mounting bases: flat and angular, which when mounted to a vertical surface will set it at an angle of 45 degrees to the plane.

The WAS W144/70 Series LED Work Lamp delivers powerful, reliable illumination with up to 4,000 lumens output, making it ideal for demanding commercial and off-highway applications. Designed for 12–70V systems, it features robust IP66/IP68-rated housing, ensuring resistance to dust, water, and harsh working environments. Available with multiple connector options including Deutsch and Superseal, and ECE-approved for road use, this compact yet high-performance lamp is perfect for plant machinery, HGVs, trailers, and utility vehicles.

The WAS W116 ECO Series LED Driving Lights are high-performance, 9-inch round spot lamps designed for commercial and off-road vehicles. Featuring powerful full-LED output with up to 215,000 candela, they combine driving beam and integrated position light functions in a durable, corrosion-resistant housing. The range includes line or ring-style position lights and operates on 12/24V systems, offering full ECE R112, R7, and R10 approval for road use. With models like the 871 ECO and 872 ECO, these lamps deliver exceptional visibility, long service life, and ADR-ready compliance—ideal for fleet operators, vehicle converters, and installers looking for reliable LED driving light solutions.

The WAS W257 Series LED Driving Lights are 179mm multifunctional lamps designed for commercial, off-road, and heavy-duty vehicles. Combining powerful driving or fog beam performance with optional front position and side marker lights, the range offers multiple variants featuring neon ring, line, or light guide DRL styles. With robust IP6K9K-rated construction, 12/24V compatibility, and full ECE approvals (R112, R7, R6, R10), the W257 Series delivers ADR-compliant lighting with modern styling and high durability—ideal for fleet upgrades, plant equipment, and vehicle conversions.