Delivery - Under £20 is £3.99, under £75 is £5.99, over £75 is FREE (prices ex VAT) INTERNATIONAL SHIPPING AVAILABLE We are open Monday to Thursday from 8am-5pm and on Fridays 8am-4pm... CONTACT US : email: sales@dun-bri.com / telephone: +44 (0)1763 274185

Guide To: CISPR 25

26 January 2022

CISPR 25 contains limits and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 5,925 MHz. This applies to vehicles, boats, internal combustion engines, trailers, devices and any electronic/electrical component intended for use in vehicles, boats, trailers and devices. Refer to International Telecommunications Union (ITU) publications for details of frequency allocations.

The limits are intended to provide protection for on-board receivers installed (per the manufacturer’s guidelines) in a vehicle from disturbances produced by components/modules in the same vehicle. Examples of receiver types to be protected are broadcast receivers (sound and television), land mobile radio, radio telephone, amateur, citizens' radio, satellite navigation (GPS etc.), Wi-Fi, V2X, and Bluetooth.

CISPR 25 does not include protection of electronic control systems from radio frequency (RF) emissions or from transient or pulse-type voltage fluctuations. These subjects are included in ISO publications. The limits of CISPR 25 are recommended and subject to modification as agreed between the customer (e.g. vehicle manufacturer) and the supplier (e.g. component manufacturer).

CISPR 25 is also intended to be applied by vehicle manufacturers and suppliers which are to be added and connected to the vehicle harness or to an on-board power connector after delivery of the vehicle. This document defines test methods for use by vehicle manufacturers and suppliers, to assist in the design of vehicles and components and ensure controlled levels of on-board radio frequency emissions. The emission requirements in this document are not intended to be applicable to the intentional transmissions from a radio transmitter as defined by the ITU including their spurious emissions.

NOTE 1: This exclusion is limited to those intended transmitter emissions, which leave the EUT as radiated emissions and are coupled onto the wire line in the measurement setup. For conducted transmissions on frequencies intentionally produced by the radio part of an EUT, this exclusion does not apply.

NOTE 2: It is usual for customers and suppliers to use radio regulation standards to manage the effect of spurious emissions from a radio transmitter unless limits of spurious emission are agreed in the test plan.

© 2024 Dun-Bri Services Ltd . Watermill Industrial Estate, Aspenden Road, Buntingford SG9 9JS

We have placed cookies on your device to help make this website better.